hey guys i have started a new project it is a set of 3 breeding cages that are all 500hx600wx400d

To do List:

make nestboxs

mount nestboxs

but cage front or wire on

make door

make trays

drill nesbox hole

 

http://i490.photobucket.com/albums/rr262/l...s1/SDC12250.jpg

 

http://i490.photobucket.com/albums/rr262/l...s1/SDC12253.jpg

Edited April 23, 200916 yr by maesie
Changed images to links. All photos must be 640 x 480 or less

looking forward to seeing you finish it off Good luck with it.

Very Good. I like the casters on the bottom.

 

I'd add a front rail to each cabinet. Allow 15mm gap for a tray. The rail should be between 20mm - 25mm and can be used to position the cage front.

im not sure on perches left to right or back to front?

looks great!! perches are always best running accross the narrowest width to allow some flight.

Front to back is best.

Did you make this or is it a pantry cupboard you are converting ? Are you mounting the nestboxes externally ?

 

Cage fronts from Swan Valley Birds in Midland are 600 wide by 460 high...that would leave you 40 mm for the tray section at the bottom. Cage fronts are around $12 each roughly.

Edited April 24, 200916 yr by KAZ

hey guys i have started a new project it is a set of 3 breeding cages that are all 500hx600wx400d

To do List:

make nestboxs

mount nestboxs

but cage front or wire on

make door

make trays

drill nesbox hole

 

http://i490.photobucket.com/albums/rr262/l...s1/SDC12250.jpg

 

http://i490.photobucket.com/albums/rr262/l...s1/SDC12253.jpg

 

are those normal breeding cabinets?

if thats what they are they are really small

hey guys i have started a new project it is a set of 3 breeding cages that are all 500hx600wx400d

To do List:

make nestboxs

mount nestboxs

but cage front or wire on

make door

make trays

drill nesbox hole

 

http://i490.photobucket.com/albums/rr262/l...s1/SDC12250.jpg

 

http://i490.photobucket.com/albums/rr262/l...s1/SDC12253.jpg

 

are those normal breeding cabinets?

if thats what they are they are really small

 

 

They are about right size for breeding cabinets.

Edited April 24, 200916 yr by **Liv**

are those normal breeding cabinets?

if thats what they are they are really small

Looks about the same width as your setup mariah...go get a tape measure and measure yours, because you still havent managed to measure yours right yet.

Edited April 25, 200916 yr by KAZ

thansk kaz i might go up and maurie at swan valley and see what he has and just fora look aswell