Hi,

 

I have an old dresser of mine that I am going to turn into 4 breeding cabinets for budgies! Each cabinet will be approx 90cm long, 38cm wide and 32cm high. Is this big enough? I will attach the boxes on the OUTSIDE of the cages, held in place by those L shape brackets you can get from Bunnings, and run a couple of Dowel perches - Bunnings again! across the cage. Will put wire on the front, with access doors on front and sides. Hoping for slide out tray too, think I can do this by the way its set up. Will sand off any paint that the budgies could possibly get to.

 

Any advice and comments/criticism welcome,

 

Thanks,

 

Sam :28:

Sounds good ..... But I would run two perches front to back and not sideways across

snap a picture of it now and when you are in the process of doing it so members can give you advise during the process and visually see it would help too .

yep okay I'll do that thanks Elly and KAZ I was already going to run from front to back thats what I meant I have seen other members do the same and also I have 2 breeding cages at home that the perches run front to back - makes alot more sense

Sounds like a good idea.

Recycling is good when it worlks out

Sounds good. A few people have been doing this on the site you might be able to see the results of some of them with a quick search. They look good.