Jump to content

Nest Boxes


Daz

Recommended Posts


  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

There has been some talk of nest boxes and what to use. Well I have been there too. Is the box too small? Is the box too shallow? Do I put the box inside or outside... There are endless questions.

 

I have tried many boxes and have been given a lot of advice. I would like to thank Hath and Bubbles for assisting and also the members of my club.

 

Points that need to be considered.

1. The access hole must be large enough for the hen to access, but not too large.

2. There must be a sence of security. A dark nest box is good.

3. There must be ventilation in hot weather. But the nest box must still be able to stay humid or the eggs will dry out and the chicks will die.

4. There must be a safe way to check on the chicks with out disturbing the hen or having the chick fall out of the nest.

5. I must be deep enough to keep the chicks in th nest bos for the correct duration. A shallow box will allow the chicks out too soon.

6. It must be able to be kept clean. Easily.

7. It must be roomy enough to take on a large clutch if need be.

8. It must be able to be securely and safely attached to the breeding cage.

 

Here is the latest model. I have made two. One in action and the other will be joining it soon. I have plans for another 7 if these work.

 

DSCN0039.jpg . DSCN0040.jpg

 

The box is 250mm (10") High x 215mm (81/2") deep x 210mm (81/4") wide and is made of 9mm external Ply.

There are two metal hooks located at the top front to hook it on to the Breeding Cage.

The hole is 50mm (2") and is set at the top corner. In the majority of my cages it would be in the top corner.

 

DSCN0041.jpg . DSCN0042.jpg

 

The back has two sections. The top slides up to get access to the chicks with the bottom section being High enough that the chicks don't fall out.

 

DSCN0043.jpg . DSCN0044.jpg

 

The bottom section slides up to allow good access to cleaning the box. (Cleanliness is extreamly inportant)

The internal floor is a piece of 19mm pine with a concave in the centre.

 

DSCN0045.jpg

This also slides out to allow for cleaning. It meassures. 193mm (75/8") x 189mm (71/2").

 

DSCN0047.jpg

 

1st Box in use. There are 6 chicks here and they have plenty of room to move about.

 

DSCN0038.jpg

 

Nest box is mounted on the outside of the Breeding Cage.

Edited by daz
Link to comment

  • Member ID:  2,365
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  52
  • Topics Per Day:  0.00
  • Content Count:  374
  • Content Per Day:  0.02
  • Reputation:   0
  • Achievement Points:  2,845
  • Solved Content:  0
  • Days Won:  0
  • Joined:  29/05/06
  • Status:  Offline
  • Last Seen:  
  • Birthday:  29/10/1955

Hi Daz and everyone, I found your topic on nest boxes quite interesting with some good ideas.

 

I too have been experienting with nest boxes.

 

I have progressed to this point with my boxes and are having good results.

 

I intentionly made my boxes on the larger side, to give the hens more

room to move when the chicks get older.

This had its problems at first, mainly being the hens trying to keeps eggs and

newly laid chicks warm enough.

 

I then came up with the idea of a partition to make the boxes smaller to help the hens.

Well this worked a treat and are having good success, also with the partition it has given me flexability.

 

When the chicks get feathered up I remove the partition which frees ups more room

in the boxes and has given the hens space when they lay again.

It also provides more air to the birds.

 

I have used an acrylic clear front with holes drilled in to create the air to circulate,

this also makes it possible to view chicks with them falling out or the hens getting

upset.

 

I have wood fronts that slide in front of the acrylic covered boxes to give the the security

that they need.

 

I have been experimenting lately with the warm weather we have been having, by leaving the wood fronts

off during the day.

With holes in the acrylic fronts it allows the boxes to keep cooler during the warmer period, so far

the hens have been happy with this and it gives me the oportunity to vies chicks and see

how they are going without intruding.

 

The boxes are attaches to the side of the breeding cabinets which have a hole in the side.

The larger sides on the nest boxes allows the hens to be able get out easerly if I have to slide

the inner nest boxes out for cleaning etc.

 

Well it's all going fine so far, love to get your feed back.

 

Cheers

Paul

 

box3-1.jpg

http://i43.photobucket.com/albums/e375/ultra777/000_0179.jpg

 

 

box1.jpg

Edited by daz
Link to comment

  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

Paul sound like a good idea. I wuld like to see more photos if you can put them up. How does the box attach to the breeding cage?

What does it look like when the hen is laying?

Link to comment

  • Member ID:  2,365
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  52
  • Topics Per Day:  0.00
  • Content Count:  374
  • Content Per Day:  0.02
  • Reputation:   0
  • Achievement Points:  2,845
  • Solved Content:  0
  • Days Won:  0
  • Joined:  29/05/06
  • Status:  Offline
  • Last Seen:  
  • Birthday:  29/10/1955

Hi guys, the nest boxes are screwed to the side of breeding cabinet.

 

The outer nest box measurements: 32cm long, 23cm wide and 19cm high.

 

The inner nest boxes measure: 28cm long, 19cm wide and 17cm high.

 

The divider measures: 9cm long, 16cm wide and 15cm high.

 

I also use are block for removal and cleaning.

 

I think it's great to share ideas, I'm learning all the time.

 

Cheers

Paul

nbox1.jpg

nbox2.jpg

nbox3.jpg

nbox4.jpg

Link to comment

  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

Paul that is a great idea. You have obviously had a good think about it.

Link to comment
  • 2 years later...

  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

Does any one else have Ideas on their nest boxes?

 

I am still using the one above with only a few changes. The concave is now 40mm and the hooks are a bit different but that's about all.

Link to comment

  • Member ID:  4,449
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  123
  • Topics Per Day:  0.01
  • Content Count:  2,475
  • Content Per Day:  0.12
  • Reputation:   0
  • Achievement Points:  14,280
  • Solved Content:  0
  • Days Won:  0
  • Joined:  18/06/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  21/04/1991

Mine are basically the same as yours Daz except mine have been painted white.

Link to comment
  • 9 months later...

  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

There is a current thought on Nest boxes and Concaves so I thought I'd bring this topic back...

 

Does any one have photos of the type of boxes they use.

 

My nest boxes have some what changed for these above.

Link to comment

  • Member ID:  5,835
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  24
  • Topics Per Day:  0.00
  • Content Count:  361
  • Content Per Day:  0.07
  • Reputation:   0
  • Achievement Points:  2,075
  • Solved Content:  0
  • Days Won:  0
  • Joined:  08/01/10
  • Status:  Offline
  • Last Seen:  

There is a current thought on Nest boxes and Concaves so I thought I'd bring this topic back...

 

Does any one have photos of the type of boxes they use.

 

My nest boxes have some what changed for these above.

 

I use internal boxes , I like the clean look of the cabinets , boxes arent pokeing out in the walk way , they have removable concaves that get replaced each year for hygene and when you have finished breeding the boxes stay in the cabinets you dont have to have somewhere to store them.

Link to comment

  • Member ID:  5,666
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  16
  • Topics Per Day:  0.00
  • Content Count:  601
  • Content Per Day:  0.03
  • Reputation:   0
  • Achievement Points:  3,375
  • Solved Content:  0
  • Days Won:  0
  • Joined:  15/10/09
  • Status:  Offline
  • Last Seen:  
  • Birthday:  23/04/1982

Daz, you're bumping a few old posts today - its great as I get more ideas all the time :raincloud: Thanks!!

Link to comment

  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

I thought that id revisit some of the thoughts we have way back....

 

I have changed my thoughts on some things and it's good to bring them up and see why..

The main change i have done to the nest boxes is gone to a 12mm plywood... I find that it insulates the eggs better.. cooler in Summer and warmer in winter. It also doesn't bow as much as the 9mm nest boxes.

Link to comment

  • Member ID:  4,130
  • Group:  Site Members
  • Followers:  1
  • Topic Count:  112
  • Topics Per Day:  0.02
  • Content Count:  4,370
  • Content Per Day:  0.75
  • Reputation:   0
  • Achievement Points:  25,112
  • Solved Content:  0
  • Days Won:  0
  • Joined:  04/03/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  12/02/1982

So is the interior slightly smaller or have you increased the overall size of the box slightly to accomidate the 3mm difference?

Link to comment

  • Member ID:  4,838
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  247
  • Topics Per Day:  0.01
  • Content Count:  4,882
  • Content Per Day:  0.25
  • Reputation:   0
  • Achievement Points:  36,650
  • Solved Content:  0
  • Days Won:  0
  • Joined:  19/11/08
  • Status:  Offline
  • Last Seen:  
  • Birthday:  02/02/1964

The interior size is 229mm height x 202mm deep x 192mm width so it is still a large nest box. I also have a 40mm concave so that brings the height inside to 189mm (roughly)

 

Reason behind my big boxes is to give room for the chicks to develop.

I like the chicks to stay as long as possible (up to 5 weeks old) in the nest box where they are geting feed by the parents.

So the height helps to stop the early leaving from the nest.

Link to comment
  • 1 year later...

  • Member ID:  6,849
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  33
  • Topics Per Day:  0.01
  • Content Count:  268
  • Content Per Day:  0.06
  • Reputation:   0
  • Achievement Points:  1,815
  • Solved Content:  0
  • Days Won:  0
  • Joined:  03/08/11
  • Status:  Offline
  • Last Seen:  
  • Birthday:  05/05/1999

great ideas every body.

Edited by maesie
Un-readable english used.
Link to comment
  • 3 weeks later...

  • Member ID:  6,849
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  33
  • Topics Per Day:  0.01
  • Content Count:  268
  • Content Per Day:  0.06
  • Reputation:   0
  • Achievement Points:  1,815
  • Solved Content:  0
  • Days Won:  0
  • Joined:  03/08/11
  • Status:  Offline
  • Last Seen:  
  • Birthday:  05/05/1999

carnt belve the knowladge of people on this site

i have been looking at building some boxes dose any one else have ideas and photos thanks that would be great

:D

 

 

Link to comment
  • 1 month later...

  • Member ID:  6,917
  • Group:  Site Members
  • Followers:  0
  • Topic Count:  10
  • Topics Per Day:  0.00
  • Content Count:  73
  • Content Per Day:  0.00
  • Reputation:   0
  • Achievement Points:  465
  • Solved Content:  0
  • Days Won:  0
  • Joined:  21/09/11
  • Status:  Offline
  • Last Seen:  
  • Birthday:  26/04/1991

Hi everyone, I have found a place in qld where you can buy Hagen Vision Plastic Nest Box. Chermside Pet Paradise, the owner is willing to order them in for people if they want more than they have instock. They have 3 at this moment.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...